denon avr 5800 manual

Select “ON” or “OFF”. Enter the setting. Furthermore, it is equipped with a function for learning the control signals of remote control units of other manufacturers, so it can also be used to operate non-DENON remote control compatible video components. Turn on the power. Press the POWER operation switch (button). This mode can be selected for all input sources other than PHONO and TUNER. Adjust the volume. MASTER VOLUME The volume level is (Main unit) displayed on the master volume level display. Start playing the source to be output. IN) jacks Set the external input (EXT. IN) mode. Press the EXT. IN (on the EXT. IN button on the remote control unit) to switch the external input. The playback switches as shown below each time the button is pressed. Select the mode to suit your tastes. PURE DIRECT mode In this mode, the music is played with an extremely high level of sound quality. REMOTE CONTROL UNIT: Move jog stick “ENTER” back and forth to adjust the level of the selected speaker. Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. INPUT SELECTOR (Main unit) w Set the input mode to “AUTO”. INPUT MODE (Main unit) DTS Neo:6 mode Surround playback can be conducted for the analog input and PCM digital input 2-channel signals. Select one of the eight provided surround modes according to the program source you want to play and adjust the parameters to achieve a more real, powerful sound field. SURROUND MODE DOLBY SURROUND SURROUND DIRECT STEREO SCREEN (Main unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: WIDE SCREEN SUPER STADIUM JAZZ CLUB CLASSIC CONCERT MATRIX. Display the surround parameter screen on the monitor. The screen for the selected surround mode appears. “TONE” cannot be selected in the Direct or Home THX Cinema (Remote control unit) mode.

• denon avr 5800 manual, denon avr 5800 service manual, denon avr 5800 manual, denon avr 4800 manual, denon avr 5800 service manual.

Be sure to keep this manual for future reference should any questions or To be sure you take maximum advantage of all the features the AVR-5800 has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference should any questions or problems arise. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. NOTE: This unit cannot be used with MC cartridges directly. Use a separate head amplifier or step-up transformer. The fan is activated under certain usage conditions. It is temperature and volume level sensitive, to minimize or prevent audible fan noise. Connection jack FRONT SPEAKER SYSTEMS subwoofer with built-in amplifier (super woofer), etc.Power indicator.(32) Power switch.(32) Headphones jack (PHONES).(35) DIRECT button.(44) INPUT MODE selector button.(33) ANALOG button.(33) EXT. The low frequency signal range of channels set to “LARGE” are produced from those channels. The AVR-5800 automatically sets the optimum surround delay time for the listening room. Setting the Multi Zone Control The AVR-5800 is equipped with two sets of multi-zone outputs. Multi-zone 1 is a pre-output with an output level adjustment function. The test tones are emitted from the different speakers in the following order, at 4-second intervals the first time and second time around, 2-second intervals the third time around and on: When the surround back speaker setting is set to “1spkr”. Press the ENTER button at the point where the test noise starts sounding distorted. The AVR-5800 automatically sets the subwoofer peak limit level. This prevents future inadvertent subwoofer overload due to excessively strong bass content when the master volume control is at a high level. At the System Setup Menu select “On Screen Display”. Switch to the On Screen Display screen.

Page 9 Connecting a Video Component Equipped with Color Difference (Component - Y, R-Y, B-Y) VideoPage 11 Connecting the external input (EXT. IN) jacks. Page 12 Speaker system connectionsPage 15 Remote control unitPage 17 NOTES. Page 18 Before setting up the systemPage 19 Setting the type of speakersPage 22 Setting the delay time. Page 23 6 Set the distance between thePage 25 Setting the channel level. Page 26 7 Select “Yes”.Page 27 Subwoofer peak limit level setting. Page 28 CAUTION! Page 30 2 Switch to the Auto Preset Memory screen.Page 31: Remote Control Unit 8 REMOTE CONTROL UNIT. Page 32: Operation 9 OPERATIONPage 33 Playing the input sourceThe AVR-5800 is equipped with three 2-channel playback modes exclusively for music. Select. Page 40 Multi-source and multi-zone playbackPage 43 3 MAIN UNIT:We recommend using the surround modes. When the HOME THX CINEMA button is pressed, the surround mode. Page 46 Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)Page 47 Surround parameters wPage 48: DENON Original Surround Modes 11 DENON ORIGINAL SURROUND MODES. Page 49 DSP surround simulationPage 52: Listening to the Radio 12 LISTENING TO THE RADIOPage 54: Initialization of the Microprocessor Recalling preset stationsPage 55: Troubleshooting 15 TROUBLESHOOTING. If a problem should arise,first check the following.Page 57 Surround back speakers. The THX Surround EX format adds new “Surround Back” (SB) channels to the conventional 5.1-channel system. Page 58 Speaker setting examplesUse these examples as guides. Page 59 (3) When using different surround speakers for movies and musicPage 60 SurroundPage 61 (2) Dolby Pro LogicTHX is an exclusive set of standards and technologies established by the world-renowned film. Page 64 System setup items and default values (set upon shipment from the factory)Page 65 Surround modes and parametersPage 66: Specifications 17 SPECIFICATIONS. It is a work horse, and just keeps on truckin. I love the unit.

When this parameter is turned off, the SBL and SBR channel signals are equivalent to the SL and SR channels, respectively. LEVEL: This parameter sets the strength of the effect signals in the WIDE SCREEN mode. Auto tuning Set the input function to “TUNER”. INPUT SELECTOR (Main unit) (Remote control unit) Watching the display, press the BAND button to select the desired band (AM or FM). Press the MEMORY button. (Remote control unit) Main unit: Press the MODE SELECT button until “TUNER PRESET” appears on the set’s display. Remote control unit: Press the SHIFT button and select the desired memory block (A to E). Remote control unit: Watching the display, press the SHIFT button to select the preset memory block. MODE SELECT (Main unit) (Remote control unit) Main unit: Watching the display, select the desired preset channel. This means that you can connect a pair of bipolar or dipolar surround speakers (mounted on either side of the prime listening position), as well as a separate pair of direct radiating (monopolar) speakers placed at the rear corners of the listening room. Adding these, however, allows you to achieve stronger surround effects not only with sources recorded in THX Surround EX, but also with conventional 2- to 5.1-channel sources. Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Set the surround mode to “DOLBY SURROUND” to play in Dolby Pro Logic. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expanded surround signals. On the AVR-5800, when the Home THX Cinema mode is on, THX processing is automatically added after. Page 4: Cautions on Installation 2 INTRODUCTION. This remarkable component has. Page 5: Features 3 CAUTIONS ON HANDLING. Page 6: Connections 5 CONNECTIONS.

If the volume is turned up during this time, the output will be very high after the muting circuit stops functioning. Always wait until the muting circuit turns off before adjusting the volume. Dolby Digital is the default digital audio delivery system for North American DVD and DTV, and is available on laser discs as well as some digital satellite direct-to-home services. THX Ultra certification is the highest performance level, and provides a rigorous set of performance standards, along with proprietary surround sound post-processing technologies, designed to enhance the surround soundtrack playback experience in the home theater. This is best accomplished by the use of specially-designed surround speakers that offer a wide diffusion pattern (bipolar dispersion) or by using surround speakers that provide broad dispersion with a minimum of onaxis localization (dipolar dispersion). Side wall mounting (closer This assures future upgrade possibilities for any future multichannel sound format. Do not use them for hair driers, etc. Never connect equipment whose total capacity is above 120 W (1 A.) Never use them for hair driers, TVs or other electrical appliances. Use a separate For details, see page 6. When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections according to the equipment’s instruction manuals. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks. IN) jacks, see page 38. Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. Doing so could result in electric shocks.

Comments To purchase AVR-5800 spares or accessories, please contact the company via their website or visit an authorised retailer. Get news, info, tips and offers straight to your inbox. Sign up - you know you want to. Choose your country below to get started. Ramon Rivero y Av. Oquendo - Recoleta Edificio Cine Center - Local Sky Games Cochabamba Bolivia TEL: Parque Industrial Naucalpan CP 53480 Estado de Mexico Mexico TEL: Rogelio Cantu 370 Col.Biharia 67-77, Sector 1, Metav Business Park, Building C Bucharest TEL: Malaysia TEL: Economia Sts. Libis, Quezon City, Philippines. No 5034 5D ASH SHERA, Unit No 1 Alazizyah, Alkobar 34742-6965 Saudi Arabia TEL: AB1408 Jebel Ali, Dubai. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. Be sure to keep this manual for future reference should any questions or problems arise. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. All other servicing should be referred to qualified service personnel. Always set the power switch to the standby position before connecting and disconnecting connection cords. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. Because of this, the output signals are greatly reduced for several seconds after the power switch is turned on or input function, surround mode or any other-set-up is changed.

andTHX Ultra certification is theThe AVR-5800 is fully compatible with THX Surround EX, the latestThe AVR-5800 is compatible with DTS-ES Extended Surround, a newThe AVR-5800 is also compatible with DTS Neo:6, a surround modeDENON has developed a wide screen mode with a new designAll eight channels, including the seven main channels and the lowDEVICES DACs, for optimum high fidelity reproduction of musicProvides for the first time the ability to optimize surround soundMotion picture soundtracks use the surround channel(s) toThis is best accomplished bySide wall mounting (closerWith full range discrete surround channels, as well as threeProducers of multi-channel discrete digital music recordingsThe DENON AVR-5800 provides the ability to connect twoThe AVR-5800 is equipped with two sets of multi-zone outputsThese are level adjustable pre-outputs. (A fixed output levelThe video signals of the input source selected with the multizone 1 selector are output.When set at the System Setup Menu, the power amplifier forIn addition to composite video and “S” video switching, the AVR5800 provides 3 sets of component video (Y, R-Y, B-Y) inputs forAllow you to watch one source (visual) while listening to anotherFeaturing discrete high current power transistors, the power ampFor future multi-channel audio format(s), the AVR-5800 is providedThis assures future upgrade possibilities for any future multichannel sound format.Do not use them for hairIf this happens, turn on theConnecting the audio components. CD recorder or Tape deck 1. MD recorder or Tape deck 2. Connecting a tape deck. Connections for recording. Connect the tape deck’s recording input jacks (LINE IN or REC) to thisConnections for playback. Connect the tape deck’s playback output jacks (LINE OUT or PB) to thisConnecting the pre-out jacks. Use these jacks if you wish to connect external power amplifier(s) toWhen using only one surround back speaker, connect it to left channel.

Connecting the AC OUTLETSNo power is supplied from these outlets when this unit’s power is at standby. Never connect equipment whose total capacity is above 120 W (1 A.)Never use them for hair driers. TVs or other electrical appliances. CD player. AC outlets (wall). AC cordAC 120V, 60Hz. Connecting a CD player. Connect the CD player’s analogTurntableGround wire. MD recorder, DAT deck or other component. Extension jacks for future use. Connecting a turntable. Connect the turntable’s output cord to the AVR-5800’s PHONO jacks, the. L (left) plug to the L jack, the R (right) plug to the right jack.Use a separateIf humming or other noise is generated when the ground wire isCD player or other component equippedConnecting the DIGITAL jacks. Use these for connections to audio equipment with digital output. Refer to page 28 for instructions on setting this terminal.Using an improper cable can result in a drop in picture quality. TV or DBS tunerVIDEO MONITOR OUT jackOUT-2 jack. Note, however,LD player, CDV player, etc.Video deck 2. LD player or other componentVideo deck 1Connecting the audio output jacks. OUT jacks using pin plug cords. Connect the another video deck to the VCR-2 or VCR-3 jacks in the same way.The input selectors for the S inputs and pin jack inputs work in conjunction with each other. This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input fromWhen connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections according to theLD player, CDV player, etc. TV or satellite broadcast tunerConnecting a video disc player (VDP)Monitor TV. Connecting a monitor TVNote, however, that the AVR5800’s on-screen display signals are not output from this jack. Video deck 2. Connecting the video decksConnect the third video deck to the VCR-3 jacks in the same way. Video deck 1.

The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. Should this occur, please follow these steps: be sure to switch off the power of this unit, check whether there are any faults with the wiring of the speaker cables or input cables, and wait for the unit to cool down if it is very hot. Improve the ventilation condition around the unit and switch the power back on. If the protector circuit is activated, the speaker output is cut off. Turn off the set’s power, wait for the set to cool down, improve the ventilation around the set, then turn the power back on. The fan is activated under certain usage conditions. It is temperature and volume level sensitive, to minimize or prevent audible fan noise. If this should happen, move the speaker away to a position where it does not have this effect. If you wish to output the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 30.) When this setting is selected, low frequencies of below 80 Hz are assigned to the subwoofer. The low frequency signal range of channels set to “LARGE” are produced from those channels. Therefore, the low frequency signal range that are played from the subwoofer channel are only the low frequency signal range of LFE (only during Dolby Digital or DTS signal playback) and the channel specified as “SMALL” in the setup menu. THX is recommended in this play mode so that bass interference is less likely to occur in the room. This software is scheduled to go The same signals as those of the surround channels are output from.

Be sure to keep this manual for future reference should any questions orThe exclamation point within an equilateral triangle is intendedOperation is subject toThis Class B digital apparatus meets all requirements of the Canadian. Interference-Causing Equipment Regulations.Allow for sufficient heat dispersion whenTenir compte d’une dispersion de chaleurHold the plug when unplugging the cord.Quick stops, excessiveArticle 810 of theSee Figure A.A. The power-supply cord or the plug has been damaged;B. Objects have fallen, or liquid has been spilled into theC. The appliance has been exposed to rain; or. D. The appliance does not appear to operate normally orE. The appliance has been dropped, or the enclosureAs this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review theCautions on Installation.4. Cautions on Handling.5. Features.5. Part Names and Functions.14, 15. Remote Control Unit.31To prevent short circuits or damaged wires in the connectionAfter reading, store this instructions along with the warranty in aCheck once again that all connections are proper and that there areAlways set the powerIf this happens, take the following steps:For heat dispersal, leave at least 10 cm of space between theA clicking noise may be produced if the input function is switchedIf this happens,Please be sure to unplug the cord when you leave home for,The PRE OUT jacks and SPEAKER terminals include a mutingAlways wait until theFeaturing dual 32 bit high speed DSP processors, operatingUsing advanced digital processing algorithms, Dolby DigitalNorth American DVD and DTV, and is available on laser discs asDTS provides up to 5.1 channels of wide-range, high fidelityHome THX is the unique collaboration between Lucasfilm Ltd.

Connect the components’ audio inputs and outputs as described on page 6.Jacks (DVD Player). In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) videoDVD player. Connecting a DVD player. DVD IN jacksMonitor TV. Connecting a monitor TV. MONITOR OUT jackY”, etc.). For details, carefully read the operating instructions included withFM antenna adapter assembly. AM loop antenna assembly. Connect to the AMBend in the reverseInstallation hole. Mount on wall, etc. Connection of AM antennasNote to CATV system installer. This reminder is provided to call the CATV system installer’sNotes:Surround. Subwoofer. Front. CenterFor instructions on playback using the external input (EXT. IN) jacks, see page 38. Connecting the MULTI SOURCE jacksAnother room. Integrated pre-main amplifierFor instructions on operations using the MULTI SOURCE jacks, see page 37.Mismatching of polarities willSpeaker ImpedanceDoing so could result in electric shocks. Connecting the speaker cordsConnecting banana plugs. Either tightly twist or terminate the core wires. Turn clockwise to tighten, then insert theProtector circuit. The purpose of this circuit is to protect the speakers underWhen the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. ShouldImprove theIf the protection circuit is activated again even though there are no problems with the wiring or the ventilation around theNote on speaker impedanceTurn off the set’s power, wait for the setCooling fan. The fan is activatedIt is temperature and volume level sensitive, to minimize or prevent audible fan noise.Connection jack forIf a speaker is placed nearMULTI FUNCTION control dial (CONTROL).(43). Remote control unitThe USB terminal is a terminal that will be used in the future to update the microprocessor program, etc.

These settings are required to set up the listening room’s AV system centered around the AVR-5800. Transmission codesScreen while icons are displayedTuner preset. Main volume of AV amplifier. Muting of AV amplifier. System setupDefault settings. Speaker. Configuration. Input the combination of speakers in your system and theirSpeaker. Setting). Use this function when using multiple surround speakerYesSub WooferMulti Zone-1This sets the output level for the multi-zone 1Variable. Power AMP. Assignment. Set this to switch the surround back channel’sSurround Back. Channel. Level. This adjusts the volume of the signals output from the speakers andSubwoofer. Peak Limit. Lev. This parameter is for detecting the maximum level of the low bassDigital In. This assigns the digital input jacks for the different inputAuto Tuner. Presets. SmallSmallOn Screen. Display. Sub WooferSurround Back Sp.Surround Sp. SurroundSB CH Auto. Flag Detect. Multi Zone. Control. Center Sp.Front Sp. Front L. Front R. Center. SurroundBack L. Surround. Back R. SubwooferInputInputsFM stations are received automatically and stored in the memory.If you wish to outputBasic system layout (For a THX Surround EX system). Center speaker system. Surround back speaker systems. Front speaker systems. Set these at the sides of the TV or screen withSurround speaker systems. With the AVR-5800 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and surroundThis function makes it possible to achieve the optimum sound fields for different sources by switching between two systems of surroundPress the “AVAMP” icon to display the page section. Press the “Push the remote control unit’s jog stickPush the remote control unit’s jogPress the “LCD 10s” button on thisSetting the type of speakersMake the system setups by pushing the jog stick on the remote control unit forward and backward, leftCenter Sp. Front Sp. Surround Sp. A. Surround back Sp. Surround Sp.

BThe System Setup Menu reappears.The surround speaker setting screen appears.If you do not know, try comparing the sound at both settings (setting the volume to a level lowSmall.Select this when using speakers that cannot reproduce low sounds of below 80 Hz with sufficient volume. When this setting is selected, low frequencies of below 80 Hz are assigned to the subwoofer. If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, centerTo take full advantage of the performance of the Home THX certified speaker systems, set the front, center and surround speaker sizeFor the majority of speaker system configurations, using the SMALL setting for all five main speakers and Subwoofer On with a connectedWhen “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”, and when “Subwoofer” is set to “No”, “Front” is automaticallySelecting the surround speakers for the different surround modesSelect the surround speakers to be used in the different surround modes.When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the set switches to the subwoofer mode. Speaker type setting when using both surround speakers A and B. If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B. Setting the Subwoofer modeThe System Setup Menu reappears.The low frequency signal range of channels set to “LARGE” areConfiguration” settings (see page 19).In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room,THX is recommended in thisSetting the Surround Back channel. Set the operation for the digital signals when playing in the 6.1 SURROUND, DTS-ES and THX SURROUND EX surround modes.The System Setup Menu reappears. We recommend setting this toOFF.Set the “OFF” mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which theON.

This function only works with software on which a special identification signal is recorded. This software is scheduled to goThis is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recordedNon-Flag Source SB ch Output setting. OFF.Playback is conducted without using the surround back speaker. Non MTRX.Playback is conducted using the surround back speaker. The same signals as those of the surround channels are output fromSurround back channel is reproduced using digital matrix processing.Select the setting according to the program source to be played.Preparations. Measure the distances between the listening position and the speakers (L1 to L5 on the diagram atL1: Distance between center speaker and listening position. L2: Distance between front speakers and listening position. L3: Distance between surround speakers and listening position. L4: Distance between surround back speakers and listening position. L5: Distance between subwoofer and listening positionSelect (darken) the desired units, “Meters” or “Feet”.Delay Time screen appears automatically. At the System Setup Menu select “Delay Time”.The distance changes in units of 1Example: When the distance is set to 12 feetIf “Yes” is selected for “Default”, the settings are automatically resetPlease note that the difference of distance for every speaker should be 15In this case, please relocate the blinkingThe System Setup Menu reappears. The AVR-5800 automatically sets the optimum surround delay time for the listening room. Setting the Multi Zone Control. The AVR-5800 is equipped with two sets of multi-zone outputs. Multi-zone 1 is a pre-output with an output level adjustment function. Multi-zone 2 is a fixed output level pre-output. Using the power amplifier assignment function described below, it is also possible to connectLevel” then press jog stick “ENTER”.Variable. VOLUME UP and VOLUME DOWN).

The output level is fixed at the set level and the volume can no longer be adjusted. Make this setting to switch the power amplifier for the surround back channel to Multi-zone 2.Select “Surround Back” to use as the surround backWhen “Surround Back” is selectedSetting the channel level. Use this setting to adjust so that the playback level between the different channels is equal. From the listening position, listen to the test tones produced from the speakers to adjust the level. The level can also be adjusted directly from the remote control unit. (For details, see page 42.). When using both surround speakers A and B, their playback levels can be adjusted separately.Select “Auto” or “Manual”. Adjust the level while listening to the test tones produced automaticallySelect the speaker from which you want to produce the test tone toExample: When the “Auto” mode is selectedAdjusts the balance of the playback level between the channels when using surround speakerThe “Surr. Sp.” can only be selected when both surround speakers A and B have beenSelect “Test Tone Start”.Test tones are automatically emitted from the different speakers. The test tones are emitted from the different speakers in theWhen the surround back speaker setting is set to “1spkr” forUse the CURSOR buttons to adjust all the speakers to the sameMove jog stick “ENTER” left and right to select the speaker for whichFlashingThe “Channel Level” screen reappears. To cancel the settings, select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again. The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position. If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level testNOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.